| |
Hydraulic Compression Tools |
|
| |
|
|
| |
| MODEL No. |
| LP-430B |
| |
| Accepts existing 12 ton U-type dies |
|
 |
|
|
| |
|
|
| |
|
|
| |
| SPECIFICATIONS |
| Ram stroke |
: |
36 mm |
| Force at die face |
: |
110 kN |
|
|
| |
|
|
| |
| SIZE |
| 127 (Dia) x 557 (L) mm |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| REMARKS |
| * |
Low pressure hydraulic compression tool |
| * |
Direct power input from truck PTO |
| * |
Relief setting at 13.7Mpa (2,000 PSI) |
| * |
Suitable for bucket truck use |
| * |
Specify the manufacturer's die and connector numbers |
|
|
| |
|
|
| |
| FEATURES |
| The LP-430B hydraulic tool is directly powered by PTO (Power Take Off) from utility bucket trucks or any vehicle with a low pressure hydraulic circuit having Line pressure of 13.7Mpa or 2,000 PSI and a maximum flow of 35 liters/min.or 9 GPM. |
| |
| The LP-430B is designed to operate with either Open-Center or Closed Center hydrarlic system by rotating the head to the position. |
| |
| The LP-430B has the same compression head as the EP-430 so that dies are interchangeable with all 12 ton U-type dies. |
| |
| It has built-in relief valve to prevent overloading the tool from more than 13.7Mpa or 2,000 PSI of input pressure. |
| |
| The LP-430B is fitted with a two step safety trigger to eliminate accidental operation. |
| |
| Trigger guard is rubber coated to protect operator against sharp edges. |
|
|
| |
|
|
| |
 |
|
| |
|
|
