|
|
| |
Hydraulic Punches |
|
| |
|
|
| |
| MODEL No. |
| SH-70B |
| |
| Punching capacity : 20.5 mm diameter
hole on 13 mm thickness mild steel |
|
 |
|
|
| |
|
|
| |
|
|
| |
| SPECIFICATIONS |
| Thorat depth |
: |
70 mm |
| Oil volume required |
: |
82 cc |
| Output force |
: |
304 kN at 68.5 Mpa
pressure |
|
|
| |
|
|
| |
| SIZE |
| 360 (H ) x 210 (W) x 95 (D) mm |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| ACCESSORIES |
| Punch & Die for mild steel :
10.5, 13.5, 17.5, 20.5mm
diameter, Hand pin,
Steel carrying case |
|
|
| |
|
|
| |
| REMARKS |
| * |
Powerful perforation up to 13 mm
thick mild steel with a 20.5 mm
maximum hole |
| * |
Recommended for angle iron, plates,
beams and bus bars |
| * |
Stripper guide extends to grip
material before punching so that
bending and binding or slippage can
be avoided |
| * |
Stripper guide clamps punch in
place to free operator's hands |
| * |
70 mm throat depth allows commonly
used angle iron |
| * |
New fixed Support stand. |
|
|
| |
|
|
| |
| FEATURES |
| The portable SH-70B punch was designed to punch holes through 13 mm mild steel, aluminum and copper. |
| |
| A stripper guide extends on either side
of the ram to strip the material after
punching. This powerful punch will
operate from any 68.5Mpa (10,000 PSI)
hydraulic pump. |
| |
| The SH-70B comes complete with four
sets of punch and die sizes for 3/8", 1/2",
5/8" and 3/4" bolts, hand pin, carrying
case. |
|
|
| |
|
|
| |
 |
|
| |
|
|
|
|
|
