| |
Other Tools |
|
| |
|
|
| |
| MODEL No. |
| NP-400 |
| |
| Peels insulation jacket of the conductor |
|
 |
|
|
| |
|
|
| |
|
|
| |
| SPECIFICATIONS |
10 mm to 32 mm O.D. insulated
cable (Vinyl or polyethylene
jackets) with insulation thickness of
1.5 mm to 3 mm |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| REMARKS |
| It is necessary to change the blade
depth according to the insulation
thickness. |
| Operating instructionsOperating instructions: |
| 1 Set the blade depth by rotating the
adjusting knob. |
| 2 Set the conductor in the peeler. |
| 3 Start peeling by rotating the peeler
around the conductor. |
| 4 Apply hand force against the peeling
direction to end the peeling. |
|
|
| |
|
|
| |
| FEATURES |
| The NP-400 can peel insulation from a
conductor with an O.D. of 10 to 32 mm
and a maximum insulation thickness of 3
mm. |
| |
| This tool will not work on semiconductors
since the cutting blade uses a scoop
design to pull insulation away from the
wire strands. |
| |
| It is most commonly used on jacketed
aluminum and copper cables for both
underground and overhead. |
| |
| The NP-400 can handle mid-span
peeling as well as cable end preparation.
A simple rotation and hand force is all it
takes to remove the jacket. |
|
|
| |
|
|
| |
 |
|
| |
|
|
